Filter
Top Products
3939
Setup for Input Signals
Note:
After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as
necessary. (see page 22)
XGA Mode
This menu is displayed when the input signal is analog. This menu sets two types of XGA signals with 60Hz vertical
frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @
60Hz XGA input signal irrespective of this setting.
Press to select “XGA Mode”.
Press to select “1024×768”, “1366×768”.
This function operates only during input from PC IN terminal.
Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal).
Auto:
The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input ¿ rst is selected.
on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Sync
Press to select the “Sync”.
Press to adjust.
y
XGA Mode
1024 × 768
Sync
Signal
[
RGB
]
Cinema reality
XGA Mode
Auto
Off
1024
×
768