Filter
Top Products
25
Picture Adjustments
Notes:
• You can change the level of each function
(Backlight, Contrast, Brightness, Sharpness)
for each Picture Mode.
• The setting details for normal, dynamic
and cinema respectively are memorized
separately for each input terminal.
• “Backlight” can be adjusted when “ECO
Mode” is set to “Custom” and “Power save”
to “Off”. (see page 32)
Advanced settings
On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
Normalise
Normalisation)
Item Effect Adjustments
Backlight
Darker
Brighter
Adjusts luminance of the back
light.
Contrast*
Less More
Selects the proper brightness
and density for the room.
Brightness
Darker Brighter
Adjusts for easier viewing of
dark pictures such as night
scenes and black hair.
Colour
Less More
Adjusts colour saturation.
Sharpness
Less More
Adjusts picture sharpness.
* In “ENGLISH (US)” OSD language, this is displayed as “PICTURE”.
Notes:
• Carry out “W/B” adjustment as follows.
1.
Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.
2. Adjust the white balance of the dark sections using the “W/B Low R”
, “W/B Low G”
and “W/B Low B” settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Item Effect Details
Input level
Less More
Adjustment of parts which are extremely bright and hard to see.
Gamma
Down Up
S Curve 2.0 2.2 2.6
W/B High
R
Less More
Adjusts the white balance for light red areas.
W/B High
G
Less More
Adjusts the white balance for light green areas.
W/B High
B
Less More
Adjusts the white balance for light blue areas.
W/B Low R
Less More
Adjusts the white balance for dark red areas.
W/B Low G
Less More
Adjusts the white balance for dark green areas.
W/B Low B
Less More
Adjusts the white balance for dark blue areas.