Filter
Top Products
20 Pelco Manual C673M (2/01)
FLUORESCENT DISPLAY
Figure 10. Fluorescent Display
1. M (counter memory stop/month) indicator
• Lights during counter memory stop.
• Also, lights when the month (of time and date) is being entered through the front
panel.
2. PL (power loss) indicator
Lights when the VCR is turned on after a power failure during recording.
3. ALARM (recording) indicator
Flashes during alarm recording and stays on when the alarm recording is finished.
4. D (time and date search/day) indicator
• Lights during the time and date search.
• Also, lights when the day (of time and date) is being entered through the front panel.
5. INDEX (index search) indicator
Flashes when recording an index signal, and lights during the index number setup and
the index search. (Index number is shown on the Recording and Playback Mode
display.)
6. SKIP (skip search) indicator
Lights during a skip search.
7. Daylight savings time indicator
Lights when DAYLIGHT SAVINGS is set to ON.
8. SP, EP (tape speed) indicator
Indicates the tape speed (SP = standard play, EP = extended play).
9. 400 (super resolution) indicator
Lights during recording using VHS tape, during playback using VHS tape recorded in
super resolution mode, and when a VHS tape recorded in super resolution mode is
inserted in the VCR (provided SUPER RESOLUTION in the Recording Set Up menu
is set ON).
10. Repeat indicator
Lights when TAPE END in the First Time Set Up menu is set to REPEAT or
ALARM•PROT.
11. Cassette Status indicator
Lights when you insert a tape. The light advances, stops, or flashes according to tape
movement.
00441
1 2 3 4 5 7 11 12 13
14 15 16 17 18 19
8
6
400
9
10