Filter
Top Products
48 Pelco Manual C673M (2/01)
ELAPSED TIME AND REPEAT RECORDING TIMES DISPLAY
The repeat recording times and elapsed time are shown on the bottom of the Maintenance
menu.
ELAPSED TIME
The elapsed time indicates the total time the VCR has been used for recording and playback
(up to 89,999 hours). Use the elapsed time as a guide for periodic parts replacement.
REPEAT REC TIMES
• The repeat recording times field displays the number of times a tape has been
recorded on when the tape ends during recording (except when TAPE END in the First
Time Set Up menu is set to STOP).
• The number of tape uses is kept even if AC power is disconnected, provided the
backup battery is fully charged.
• The number of tape uses is reset when a new tape is inserted.
• The number of tape uses shown can be up to 200. “OVER” appears if 200 times is
exceeded.
To view:
1. Press the MENU button. The Main menu appears.
2. Turn the JOG dial to select MAINTENANCE, and then turn the SHUTTLE ring right.
The Maintenance menu appears. The repeat recording times and elapsed time are
shown at the bottom of the screen.
3. Press the MENU button. The day and time display appears.
00483
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALIZE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
<REPEAT REC TIMES> 0
<ELAPSED TIME> 0H