Filter
Top Products
10 C2639M-B (8/09)
REMOVING A DRIVE
NOTE: When disconnecting the data and power cables, be sure to pull straight up on the connectors.
Do not move the connectors back and forth or remove a connector by pulling it out by its wires.
1. Disconnect the SATA power connector and data cable (refer to Figure 3):
a. Grasp the top of each end of the SATA power connector and carefully and simultaneously pull
straight up on the connector.
b. Grasp the top of each end of the SATA data connector and carefully and simultaneously pull
straight up on the connector.
2. If a data drive is installed in the system drive basket, disconnect the SATA power and data cable.
Figure 3. Removing SATA Power and Data Cables