Filter
Top Products
Perle 10/100/1000 Ethernet Media Converter
13
Operation
Status LED
The Perle 10/100/1000 Rate converting Media converters have six
status LEDs located on the front panel of the unit.
PWR
On – Power is applied to the unit.
Blinking (slow) – Loopback Mode
Blinking (fast) – Hardware failure.
FDF (fiber)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKF (fiber )
On – Fiber link is present.
Off – No fiber link present.
Blinking (slow) – Fiber link appears
functional – copper link down
Blinking (fast) – Fiber link up and
receiving data.
100/1000 (copper speed)
Green – 1000 Mbps.
Yellow – 100 Mbps.
Off – 10 Mbps (if link is up).
FDC (copper duplex))
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKC (copper)
On – Copper link is present.
Off – No copper link present.
Blinking (slow) – Copper link
appears functional – fiber link down
Blinking (fast) – Copper link up and
receiving data