Filter
Top Products
Perle 10/100/1000 Ethernet Media Converter
5
DIP Switches
The DIP switches are accessible through the opening in the side
of the enclosure.
Note:
All switch changes take effect immediately and will result in
a link reset on both ports.
DIP Switch Settings
Auto Negotiation copper (Switch 1)
Switch Position Mode
Up (default) Auto
Down Off
Note 1: Auto negotiation should only be turned off, if the copper
link partner does not support Auto Negotiation and fixed settings
are required by the copper link partner.
Auto: When enabled, the media converter will negotiate with its
link partner to determine the most optimal parameters for this
connection. The S-1110 will advertise capabilities of 10,100 and
1000 Mbps, full and half duplex as well as pause, and remote fault
capabilities to the link partner.
If the copper link partner does not support Auto negotiation, the S-
1110 will parallel detect to 10 or 100 Mbps and force Half Duplex
mode as per IEEE specifications.
Off: When the Auto Negotiation switch is set to the OFF position,
the media converter will not negotiate the Ethernet parameters
with the copper link partner. The parameters used by the media