Filter
Top Products
Perle 10/100/1000 Ethernet Media Converter
8
Speed copper (Switch 5)
Switch Position Mode
Up (default) 100
Down 10
Note When Auto Negotiation (SW1) is set to Off, the media
converter will use this switch setting for its Ethernet copper speed
connection.
100: When Switch 5 is in the Up position, the S-1110 will force the
speed to 100 Mbps.
10: When switch 5 is in the Down position the media converter will
force the speed to 10 Mbps.
When using a Gigabit SFP module
Fiber Negotiation (Switch 6)
Switch Position Mode
Up (default) Auto
Down Off
Auto:
The Media Converter will negotiate Ethernet parameters on
the fiber connection. This will ensure that the most optimal
connection parameters will be in effect. If connecting to another
Perle Media Converter, this parameter should be set to Auto. The
Media Converter Module will advertise 1000Mbps, Full and Half
Duplex, no Pause.
Off:
The Media Converter Module’s fiber will be fixed to
1000Mbps, Full Duplex.