Philips 26HW9100D, 30HW9100D Flat Panel Television User Manual


 
L05 User’s Manual 091105.1833
11
TV Setup Menu and Sub-Menus
LANGUAGE (English / Espanol / Francais)
When you first enter the TV SETUP menu, LANGUAGE is highlighted. You can scroll
to the LANGUAGE item. Select the desired language with cursor up / cursor down.
CHANNEL INSTALL (>)
The CANNEL INSTALL menu allows the user to configure the channels that can be
accessed. When installing the channels, different inputs can be mapped to TV channels to
allow seamless integration into the channel map. The two sections below explain how to
install analog channels and AV inputs, and how to install digital channels.
Installing Analog channels
When selected, CHANNEL INSTALL menu appears as follows. Configure the inputs
and channels as described.
CHANNEL INSTALL
CHANNEL
TV 1 125
INPUT
ANTENNA / AV 1 / AV 2 / SIDE / S-VIDEO / CVI / AV3YC /
HDMI / HD CVI / DIGITAL
AUTO PROGRAM
>
CHANNEL RING
SAVED
LABEL
>
VIDEO BLANK
NO/YES
AUDIO MUTE
NO/YES
CHANNEL:
o Select the channel or input you wish to configure.
INPUT:
o Select the input source that you wish to associate with the specified
CHANNEL . This feature enables you to “map” (re-assign) a numeric channel
number to a video input, rather than to its normal RF TV channel (i.e.
ANTENNA). In other words, TV channel 2 could be used to select the AV 1
video input instead of RF (ANTENNA) channel 2. Special instructions for
mapping digital channels are included below.
AUTO PROGRAM:
o When AUTO PROGRAM is selected, the TV performs an automatic search
for the presence of viable RF signals at its tuner input. An AUTO-
PROGRAMMING ACTIVE message and a table of channel numbers
will appear. If CABLE TUNING is set to NO, channels 2 through 69 will
be checked. If CABLE TUNING is set to YES, channels 2 through 125
will be checked. When a viable signal is detected on a given channel,
that channel is highlighted in red and is added to the channel ring. Any
command from a remote control terminates the AUTO PROGRAM
session. Front-panel commands do not cancel auto-programming.
CHANNEL RING: