Philips 26HW9100D, 30HW9100D Flat Panel Television User Manual


 
L05 User’s Manual 091105.1833
22
CC-2: CC-2-mode closed captioning will be displayed if it is present on the incoming
signal.
CC ON MUTE: If the television is in audio mute mode, CC-1-mode closed
captioning will be displayed if it is present on the incoming signal.
Note: When the television is powered down and back on again, the closed captioning
setting will default to OFF, unless SAVE CC (see SAVE CC) is set to YES.
SAVE CC (NO / YES)
Save closed captioning. This feature enables the CC setting (see CC) to remain in effect
after the television is powered down.
NO: When the television is powered down and back on again, the closed captioning
setting will default to OFF.
YES: When the television is powered down and back on again, the closed captioning
setting last specified in CC (see CC) will remain in effect.
SOURCE MENU ITEM (NO / YES)
This feature provides the option to specify whether the current signal source (e.g., TV 54,
AUX, CVI, S-VIDEO, etc.) item is present in the FEATURES MENU that appears when
the remote control SLEEP or CC command is issued, or when a guest-mode remote
control RECALL command is issued.
Features Menu With SOURCE MENU ITEM = YES
NO: The SOURCE line item is does not appear in the FEATURES MENU.
YES: The SOURCE line item appears in the FEATURES MENU.
Note 1: When the SOURCE item is highlighted, cursor right or left to step through the
signal sources (e.g., tuner, AUX, S-VIDEO, etc.) that are in the CHANNEL RING. The
SOURCE item in the FEATURES MENU cannot be used to select RF (tuner) channels.
Note 2: The SOURCE item can only be used to select signal sources (e.g., tuner, AUX,
S-VIDEO, etc.) that are in the CHANNEL RING.
Note 3: If there are no signal sources in the channel ring other than the presently-selected
source, the SOURCE item is for indication only, and cannot select any other sources.
HDMI AUDIO SELECTION (HDMI / AV1 / AV2 / AV 3)
This menu item allows the user to associate an audio input to the HDMI input. Devices
with an HDMI output usually have digital audio included on the HDMI output; however,
outputs such as DVI have no audio included on the connector. For those devices with a