Filter
Top Products
L05 User’s Manual 091105.1833
13
Installing Digital Channels
CHANNEL INSTALL
CHANNEL
TV 1 – 125
INPUT
DIGITAL
MAJOR CHANNEL
0 – 999
MINOR CHANNEL
0 – 999
CHANNEL RING
SAVED
LABEL
>
VIDEO BLANK
NO/YES
AUDIO MUTE
NO/YES
• CHANNEL:
o Select the channel or input you wish to configure.
• INPUT:
o When DIGITAL is selected two additional entries are added to the menu to
allow for mapping the digital channels.
• MAJOR CHANNEL:
o MAJOR CHANNEL refers to the either the DIGITAL RF (USE CHANNEL
TABLE = NO) channel or the channel referred to in the digital channel table
(USE CHANNEL TABLE = YES).
• MINOR CHANNEL:
o MINOR CHANNEL refers to the digital sub-channel related to the MAJOR
CHANNEL specified above.
• CHANNEL RING:
o Specify whether the current channel or input is to be SAVED to or DELETED
from the channel ring (i.e., list of channels available for selection by means of
a standard guest remote control).
• LABEL:
o Input a maximum of 8 characters for the channel’s label. Cursor to the Right
to start the first character. Cursor left or right to navigate between character
positions within the label field. Cursor up or down to select characters from
the list:- A to Z, 0 to 9, . , ., .,/, :, =, ?, ;, <, >, @ or space. To edit, re-input the
character at its position. To exit, cursor left or right to navigate out of the label
editing field.
• VIDEO BLANK:
o Specify whether video for the current channel is to be displayed (VIDEO
BLANK = NO) or not displayed (VIDEO BLANK = YES).
• AUDIO MUTE:
o Specify whether audio for the current channel is to be audible (AUDIO
MUTE = NO) or muted (AUDIO MUTE = YES).
CABLE (NO / YES)
Select either standard off-air tuning (CABLE TUNING = NO) or cable offset tuning
(CABLE TUNING = YES).
FACTORY CH RESET (>)
Cursor Right will reset the channels programmed in memory.