Filter
Top Products
L05 User’s Manual 091105.1833
18
MAX VOLUME (||||||||||||| 0 - 100)
Specify the highest volume setting possible by means of either the remote control, or the
front panel (if it is not locked out). This setting cannot be less than MIN VOLUME (see
MIN VOLUME)
Note: The MAX VOLUME setting is effective whether the volume command is issued
from the front panel (if it is not locked out), a standard guest-mode remote control, or an
RC2573GR setup remote in setup mode.
SWITCH ON VOLUME (STANDARD / ||||||||||||| 0 - 100)
Specify the volume setting that takes effect when the TV is powered on.
If STANDARD, the volume at power-on will be the volume at which the TV was prior to
last power-down.
If specified as 0 - 63, that will always be the volume at power-on, until SWITCH ON
VOLUME is changed.
SWITCH ON CHANNEL (STANDARD / TV 1-125 / AUX / FRONT
/ S-VIDEO / CVI)
Specify the channel / input to which the TV will be tuned when it is powered on.
If STANDARD, the channel at power-on will be that to which the TV was tuned at last
power-down.
If specified (e.g., 2, AUX, etc.), then that will always be the channel / input at power-on,
until SWITCH ON CHANNEL is changed.
POWER ON (STANDARD / FORCED /RESTORED)
STANDARD: The TV will be in standby mode when AC mains power is first applied
after having been disconnected.
FORCED: The TV will turn ON whenever AC mains power is applied. This feature
allows the TV’s power status to be controlled for example, from an AC mains breaker.
RESTORED: When AC mains power is first applied after having been disconnected, the
TV’s power status will revert to that when AC mains power was last removed.
CHANNEL DISPLAY (NONE / NUMBER / LABEL / ALL)
Specifies which of the respective channel properties are displayed by the TV’s OSD
when a channel or input is first selected. If REMINDER (see REMINDER) is OFF, these
properties will be displayed for a few seconds, then disappear. If REMINDER is ON, the
channel properties remain on-screen whenever the TV is on.
KEYBOARD LOCK (NO / YES)
NO: The TV’s front panel is operational.
YES: The TV’s front panel is rendered inoperative.
Note: Even when KEYBOARD LOCK = NO (not locked out), front panel power on/off,
volume, or channel controls might have no effect, depending upon the settings of
POWER ON (STANDARD / FORCED), CHANNEL INSTALL, MIN VOLUME, and
MAX VOLUME.