Filter
Top Products
L05 User’s Manual 091105.1833
19
ESP (OFF / 1 HR / 2 HR / ... / 99 HR)
Energy Saving Programmability. This feature enables the TV to automatically power-
down after a specified period of time, if during any such period it receives no commands
from the front panel or remote control. This is an energy-saving feature which assumes
that the TV, after the specified period of inactivity, is no longer being viewed.
AUDIO/VIDEO MUTE (OFF / BLACK / BLUE)
Also known as “A/V muting”. Suppresses audio and video when the TV tuner is
supplied with an inadequate signal level. When there is insufficient RF signal level to the
TV tuner, the options produce the following results.
OFF: Screen displays “snow”, and the audio is white noise (“static”).
BLACK: Screen display is black, and the audio is muted.
BLUE: Screen display is blue, and the audio is muted.
AUDIO/VIDEO OUT MUTE (NO / YES)
When set to YES, turns off the audio and video MONITOR OUT signals (either
demodulated RF input or loop-through video). Intended to prevent recording of pay-per-
view content.
MONITOR OUT RF (NO / YES)
This features configures the audio and video monitor outputs (provided that
AUDIO/VIDEO OUT MUTE is not set to YES).
NO: The signals that are present at the monitor outputs are the same as those of the
currently-selected channel or video input. In other words, the monitor outputs “track”
what is viewed and heard on the TV.
YES: The signals that are present at the monitor outputs are always the tuner output (see
NOTE, below), regardless of whether the currently selected TV source is the tuner, or
video (i.e., AUX, S-VIDEO, CVI) input.
Note: When MONITOR OUT RF is initially changed from its current setting, the
monitor out signal source depends upon the previous MONITOR OUT setting, until a
different TV source is selected. From that point, until it is changed, the new MONITOR
OUT setting will perform as described.
WELCOME MESSAGE (>)
A welcome message (two lines, 20 characters) can appear on-screen when the set is
powered on. The message remains on-screen until the TV receives a command from the
remote or front panel. When the WELCOME MESSAGE setup menu item is
highlighted, cursor right or left to invoke the MESSAGE sub-menu. Cursor up or down
to select the desired MESSAGE sub-menu item. Press RECALL or MENU to return to
the SETUP main menu.