Filter
Top Products
27
6 When the update is complete, press the
Red button to return to the [Channel
installation] menu.
7 Press MENU to exit.
Test digital reception
If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
aerial or satellite dish.
1 Press MENU .
2 Select [TV menu] > [Installation] >
[Channel installation] > [Digital: Test
reception] .
3 Press to enter the [Digital: Test
reception] menu.
4 Press OK .
5 Press the Green button to automatically
start the test or use the Numeric buttons
to enter the frequency of the channel you
want to test.
If the signal quality and strength is poor, »
reposition the aerial or satellite dish
and retest.
6 When complete, press the Yellow button
to store the frequency.
7 Press the Red button to return to the
[Channel installation] menu.
8 Press MENU to exit.
Note
If you have further problems with the reception of your •
digital broadcast, contact a specialised installer.
English
EN