Filter
Top Products
32
3 Press to enter the list.
4 Press or to select a connector.
5 Press to enter the list.
6 Press or to select the device attached
to the connector.
7 Press OK to select the device.
8 Repeat the procedure until all devices are
correctly assigned to connectors.
9 Press MENU to exit.
Assign a channel decoder
Before using a SCART digital channel decoder,
select the channel to decode and assign the
decoder to EXT , EXT 1 or EXT 2 .
1 Press MENU .
2 Select [TV menu] > [Installation] >
[Decoder] > [Channel] .
3 Press to enter the list.
4 Press or to select the channel to
decode.
5 Press .
6 Select [Status] .
7 Press or to select the connector used
by the decoder.
8 Press MENU to exit.
Connections EXT 1
None
DVD
Blu-ray
HDD/DVDR
HD rec.
Game
VCR
EXT 1
EXT 2
EXT 3
HDMI 1
HDMI 2
HDMI Side
Side
3 Push the CAM in as far as it will go.
4 Turn on the TV and wait for the CAM to
be activated. This may take several minutes.
Do not remove the CAM from the slot
when in use — removing the CAM will
deactivate digital services.
Access CAM services
1 After inserting and activating the CAM,
press MENU .
2 Select [TV menu] > [Features] >
[Common interface] .
On-screen applications and content »
provided by the digital TV service
operator appear.
Assign devices
After connecting devices, assign the device
attached to each connector. This allows you to
easily identify devices connected to your TV.
1 Press MENU .
2 Select [TV menu] > [Installation] >
[Connections] .
The » [Connections] list appears.
EN