Philips 40PFL4706 Flat Panel Television User Manual


 
40 EN
Connecting the TV to the internet using an Ethernet cable
LAN
LAN WAN
54321
hub or
hub or
broadband router
broadband router
telecommunications
telecommunications
equipment (modem, etc.)
equipment (modem, etc.)
Ethernet cable
Ethernet cable
Ethernet cable
Ethernet cable
internet
internet
Note
Please purchase shielded Ethernet cables at your local store and use them when you
connect to network equipment.
After connecting an Ethernet cable, set up necessary network settings. (For the
network setup, refer to ‘Network’ on page 29.)
Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid
damaging the unit.
If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
If your telecommunications equipment (modem, etc.) has broadband router functions
but there is no vacant port, use a hub.
For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
Do not connect your PC directly to the Ethernet port of this unit.
Connecting the TV to the internet using a wireless LAN
LAN
WAN
Wireless LAN
Wireless LAN
Access Point (AP)
Access Point (AP)
(e.g. wireless router)
(e.g. wireless router)
network equipment
network equipment
(modem, etc.)
(modem, etc.)
Ethernet cable
Ethernet cable
internet
internet
Note
After you made the wireless connection, set up necessary network settings.
(For the network setup, refer to ‘Network’ on page 29.)
Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE
802.11 b/g/n. (n is recommended for stable operation of the wireless network.)
This unit does not support Ad-hoc mode.
Other radio devices or obstacles may cause interference to the wireless network
connection.
EN
Connecting a digital home theater ampli er using a digital
audio coaxial cable
DIGITAL AUDIO
IN
OUT
OUT
OUT
digital home theater ampli er
digital home theater ampli er
Note
Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over
Digital Audio Output for certain channels, shows or segments during the broadcast.