30
English
DVD Setup Menu
To navigate setup options
In the stop mode of DVD, use the remote
control to select the setup options.
1 In the DISC mode, press SYSTEM MENU to
enter SETUP mode.
2 Press à / á to select the desired SETUP
page:
General Setup Page, Password Setup Page
and Preference Page
3 Press 3 / 4 to highlight an option.
4 Enter its submenu by pressing á.
5 Move the cursor by pressing 3 / 4 to highlight
the selected item.
6 Press OK to confirm.
To return to the upper-level menu
● Press à or QUIT (in cases of value
adjustment).
To remove the menu
● Press SYSTEM MENU to exit the menu.
General Setup Page
TV Display (default WIDE)
● Select PS (Pan and Scan) for TV display at 4:3
aspect ratio if your DVD is not formatted for
widescreen viewing
● Select LB (Letterbox) for TV display at 4:3
aspect ratio if your DVD is formatted for
widescreen viewing.
● Select WIDE for TV display at 16:9 aspect ratio.
Angle Mark (default OFF)
Views picture from different recorded camera
angles (if available on your disc).
● Select ON or OFF.
OSD Language (default English)
There are three different OSD languages for
selection.
● Select English, French or Spanish.
Screen Saver (default ON)
The screen saver appears after 3 minutes in the
pause/ stop mode.
● Select ON or OFF.
pg018-pg035_DCD778_37-EngB 9/2/07, 18:5030