Filter
Top Products
32
English
TIMER
Set the timer period to activate a beeper alarm.
Setting the timer
1 On the set, press TIMER on the set to activate.
➜ Display shows TIMER and the 000 digits
flashes.
2 Tur n the TIMER control on the set counter-/
clockwise to adjust your timer period (from 001
to 180 minutes.)
3 Press TIMER again (within 90 seconds) to
confirm.
➜ Timer period starts to count down.
To cancel the timer
Press TIMER during the countdown.
➜ Clock time appears.
Timer External AV Source
External AV source
It is possible to use an additional appliance, e.g.
VCR, video game player, with the set.
1 Check the external appliance has been properly
connected (see Installation, Connecting an
additional appliance).
2 Press repeatedly SOURCE to select AV source
(or on the remote control, B and iPod/AV).
3 To avoid noise distortion, turn down the volume
on your external device.
4 Press the PLAY key on the connected appliance
to start playback.
5 To adjust the sound and volume, use the sound
controls on your external equipment and the
DCD778.
pg018-pg035_DCD778_37-EngB 9/2/07, 18:5132