Filter
Top Products
21
This option performs a test of system. This infor-
mation is useful if you need to contact customer
service.
At the Installation menu, select System Test,
then press OK. After a few seconds, the test
results will appear on screen.
Use the ▲ or ▼ buttons to scroll through the
dialog. Press the Page +/- buttons to scroll by a
full page.
Press BACK to return to the Installation menu.
The on-screen Installation should now be
complete. If you are not receiving a good picture
(or are encountering other signal problems), first
repeat these steps. If this does not help, refer to
the Smart Help section of this manual (page 42).
SYSTEM TEST
GENERAL OPERATION OF YOUR DIRECTV PLUS RECEIVER
Throughout this manual, you will notice that the everyday operation of your Satellite Receiver is based on a series of
user friendly onscreen displays and menus. These displays will help you get the most from your Satellite Receiver,
guiding you through initial installation, channel selection, timer settings and many other functions.
Most functions can be carried out using either the buttons on the front of your Satellite Receiver or the remote
control. However, you may find it easier to use your remote control in most instances.
ON SCREEN INSTALLATION (CONT’D)