Philips DTR1000 TV Receiver User Manual


 
14 DAY TO DAY OPERATION
7 Day to day operation
7.1 Switch ON / Switch OFF
your receiver (low power,
standby)
THE RED LEFT-HAND LED IS ON
Your receiver is in "Low power" mode.
Press the "Low power" button, on the front
of your receiver, to put your receiver in
Standby
You have 5 minutes to wake your receiver
up by pressing:
- Either P+, P-, BACK or a number button
on your remote. Alternatively you can
press the "+" or "-" button on the front
panel of your receiver.
Note: your remote does not control the receiver
if it is in Low Power mode.
THE ORANGE LEFT-HAND LED IS ON
Your receiver is in "Standby" mode
To Wake Up Your Receiver:
- Either Press One Of The Following
Remote Buttons: P+, P-, BACK or a
number button
- Or press "+" or "-" button on the front
panel.
To put your receiver in Low power mode
(<1W consumption)
- Press the front panel's "LOW POWER"
button
THE GREEN RIGHT-HAND LED IS ON
(TV MODE) / GREEN+ORANGE LED IS
ON (RADIO MODE
You are in TV mode / Radio Mode
To put your receiver in standby:
- Press the remote standby button
To put your receiver in Low power mode
(<1W consumption)
- Press the front panel's "LOW POWER"
button
7.2 Select TV / Radio mode
If your receiver is in TV mode
- Press the TV/RADIO button to switch to
RADIO mode
If your receiver is in Radio Mode
- Press the TV/RADIO button to switch to
TV mode
Note: The TV/Radio buttons on the Front Panel
and on the Remote Control have the same
behaviour.
7.3 Change channel
7.3.1 USING number buttons
While watching digital TV or listening to
Digital Radio
- Press the number button(s) to select the
desired channel number
7.3.2 P+/P-
You are watching digital TV or listening to a
digital radio programme
- Press P+ to select the next channel in the
list
- Press P- to select the previous channel in
the list
Note: The '-' and '+' buttons on the Front Panel
have the same function as P- and P+ buttons
on the remote control.
7.3.3 Back (last channel recall)
While watching digital TV or listening to a
digital radio programme
- press the BACK button to select the
previously watched / listened to
programme.
English