Filter
Top Products
12
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
VIDEO
S-VIDEO
LR
MAINS
Y
Pr/Cr Pb/Cb
PROGRESSIVE
INTERLACE
Back
of TV
AUDIO IN
R L
VIDEO
IN
TO TVINT IN
CH3 CH4
2
1
TO TV
VIDEO IN
IMPORTANT!
– If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In), you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
1 Use the composite video cable (yellow) to
connect the DVD Player’s CVBS (VIDEO)
jack to the video input jack on the RF
modulator.
2 Use the RF coaxial cable to connect the
RF modulator to your TV’s RF jack (cable
not supplied).
Connections
Connecting the power cord
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/ MPEG2/
Dolby Digital
MAINS
~ AC MAINS
AUDIO
OUT
Pr/Cr
Pb/Cb
Y
S-VIDEO
IN
VIDEO IN
COMPONENT
VIDEO IN
After everything is connected properly,
plug in the AC power cord to the
power outlet.
Never make or change any connections
with the power switched on.
Press STANDBY ON on the DVD
Player front panel,
“NO Media” may appear on the
display panel.
IR
NO MEDIA