Filter
Top Products
13
Programming a Recording (TIMER)
6 When all inputs are correct, press STATUS/EXIT.The program-
ming information is stored in a Timer block.
7 Insert a cassette with an intact security tab (unprotected).
8 Press TIMER SET.
'RECORD TIMER' will light up on the DVD/ VCR.
“- -” appears at PROG..
• The programme number of the TV channel has not yet been
assigned to the Plus Code number.Using numerical key pads,
select the corresponding programme number (name) of the TV
channel.
The following message appears on the screen:“ERROR”
• The entered Plus Code number is incorrect. Correct your input
or end with STATUS/EXIT.
• Check the time/date (see chapter 'Installing your video',section
'Setting the time and date').
• A daily recording was entered for the wrong day.Daily pro-
gramming can only be used for recordings to be made from
Monday to Friday.
Switching on “VPS/PDC”
• Select “VPS/PDC” using
g
or CLEAR.Press 1 to switch off
“VPS/PDC” or press 2 to switch on “VPS/PDC”.
The following message appears on the screen:“TIMER
NOT COMPLETED”
• The channel is wrong.
OTR (One Touch Recording)
This function enables you to set a recording length simply by
pressing RECORD I.
1 Follow steps 1 to 2 in 'Recording without automatic switch-off'
section.
2 Press RECORD I repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
• Recording stops when 0:00 is reached.
To check time remaining during an OTR
Press DISPLAY.
To change the recording length during an OTR
Press RECORD I repeatedly until the desired length appears.
To stop an OTR before recording is finished
Press STOP C.
To cancel the OTR but continue recording
Press RECORD I repeatedly until “REC” appears in the upper
left corner of the TV screen.
Programming a recording
(without the VIDEO Plus+ system)
1 Press VCR,then DISC/VCR MENU.
2 Select “TIMER” with K/L.Then
press B.
3 Select “ONCE”,“DAILY”, or
“WEEKLY” recording with K/L.
Then press B.
If all Timer blocks are in use,‘FULL’
will appear on the OSD.
4 Select the desired Timer block with
numerical key pads.(The flashing number indicates an empty
TIMER block.)
5 Enter the Start time (START) End time (STOP),Programme
number (PROG.),VPS/PDC information and the Date with
numerical key pads.
6 When all inputs are correct, press STATUS/EXIT.The program-
ming information is stored in a TIMER block.
7 Insert a cassette with an intact security tab (unprotected).
8 Press TIMER SET.
SELECT KL CHOOSE B
→ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Programme numbers of the 'AV1','AV2' scart socket and
'AV3' (front AUDIO/ VIDEO in jacks)
You can also programme recordings from external sources via
scart socket AV1(TV),AV2 (DECODER) or AV3 (fromt AUDIO/
VIDEO in jacks).Select programme number 'AV1' with 0.0.1,'AV2'
with 0.0.2 or 'AV3' with 0.0.3.
0:00 0:30 1:00.... 7:30 8:00
REC (Normal recording)