Filter
Top Products
16
Title Menu
1 Press DVD,then TITLE.
• The title menu will appear.
2 If the feature is not available,“ ” symbol may appear on
the TV screen.
3 Press Arrow ( L / K / B / s ) to select an item, and “OK” to
confirm selection.
• Playback will begin at the selected Title.
1 The title menu will appear.
2 Press numerical key pads to select the menu.
• Playback will start.
VCD
Basic Playback
Getting Started
Turn on the power of the TV,amplifier and any other compo-
nents which are connected to the DVD/VCR.
Make sure the TV and audio receiver (commercially available)
are set to the correct channel.
1 Press STANDBY-ON.
2 Press DVD,then OPEN/CLOSE to open disc loading tray.
3 Place the chosen disc in the tray,with the
label facing up.
4 Press PLAY
BB
.
•
The tray will close automatically,and play-
back will then start from the first chapter
or track of the disc. If the playback does
not start automatically,press PLAY B.
•
When you playback the DVD which a title menu is recorded, it
may appear on the screen.In this case,refer to
'
TITLE MENU
'
.
5 Press STOP C to stop playback.
Notes:
- A “prohibited icon” may appear at the
top-right on the TV screen during opera-
tion,warning that a prohibited operation
has been encountered by the DVD/VCR or the disc.
- With DVDs that use some titles for playback program
signals, playback may start from the second title,or it
may skip these titles.
- During the playback of two layered disc, pictures may
stop for a moment.This happens when the 1st layer
switches to the 2nd layer.This is not a malfunction.
- DVDs recorded with the NTSC system can playback
with this unit via a PAL system TV set.
- Depending on the TV,when playing back a NTSC DVD
on a PAL TV, the picture may roll up or down, shrink ver-
tically and black bars may appear at the both top and
bottom of the screen.
- It may take a time to deliver the picture or the sound.
This is not a malfunction.
Cancelling and Calling Back PBC Function
When playing Video CDs with PBC function,some operations (e.g.
select and repeat tracks) cannot be performed unless the PBC
function is cancelled temporarily.
1 Insert a Video CD.
• Title menu will appear on the display.
• Playback will start automatically.
2 Press STOP C.
3
Press the number buttons to enter the desired Track number.
• PBC function is now cancelled and the playback of the Video
CD will start.
4 To call back PBC function, press STOP C twice, and then press
PLAY B.
Playing a Disc
General Features
DVD or Video CDs may contain menus to navigate the disc
and access special features.Press the appropriate numerical key
pads or use Arrow ( L / K / B / s ) to highlight your selection
in the DVD main menu and press OK to confirm.
Note:
- Unless stated,all operations described are based on
remote control use.Some operations can be carried out
using the menu bar on the TV screen.
DVD-V
VCD
Pause
1 During playback,press PAUSE k.
• Playback will pause and sound will be muted.
2 To continue playback,press PLAY
BB
.
Note:
-
Set “STILL MODE”to “FIELD”in the Display menu if pictures
in the pause mode are blurred.(refer to 'DISPLAY SETTING')
DVD-V
Disc Menus
1 Press DVD,then DISC/VCR MENU.
• The DVD main menu will appear.
2 If the feature is not available,“ ” symbol may appear on
the TV screen.
3
If disc menu is available on the disc,audio language,subtitle options,
chapters for the title and other options will appear for selection.
4 Press Arrow ( L / K / B / s ) to select an item, and “OK” to
confirm selection.
DVD-V
DVD-V
Calling Up a Menu During Playback
• Press DISC/VCR MENU to call up the DVD main menu.
• Press TITLE to call up the title menu.
Note:
- Contents of menus and corresponding menu operations
may vary between discs.Refer to the manual accompa-
nying the disc for details.
DVD-V
Step by Step Playback
1 During playback,press PAUSE k.
• Playback will pause and sound will be muted.
2
The disc goes forward by one frame each time PAUSE is pressed.
3 To exit step by step playback,press PLAY B.
Note:
- Set 'STILL MODE' to 'FIELD' in the DISPLAY menu if
pictures during step by step playback are blurred.(refer
to 'DISPLAY SETTING')
DVD-V
Resume
1 During playback,press STOP C.
• Resume message will appear on the TV screen.
2 Press PLAY B, playback will resume from the point at which
playback was stopped.
• To cancel resume,press STOP
C twice.
Notes:
- For MP3 files, playback will resume from the beginning
of the track at which playback was stopped.
- If you turn the DVD/VCR off, Resume function will be
cancelled.
DVD-V
Fast Forward / Reverse Search
1
During playback,press
g
or
h
repeatedly to select the required
forward or reverse speed.
• For DVDs and Video CDs,fast forward or reverse search
speed is different depending on the disc.
•
For DVDs,approximate speed is 1(x2),2(x8),3(x50), and 4(x100).
• For Video CDs,approximate speed is 1(x2),2(x8),and 3(x30).
• For Audio CDs, approximate speed is x16.
• For MP3,approximate speed is x8.
2 To r eturn to normal playback,press PLAY B.
DVD-V
VCD
MP3
JPEG
CD
VCD
CD
MP3
JPEG
VCD
CD
MP3
JPEG
VCD
CD
MP3
JPEG
DVD-V
VCD
CD
MP3
JPEG