Philips HDT 8520 DVR User Manual


 
11Gettingstarted
ENGLISH
3.2 Connecting your HDTV
Danger
Riskofelectricshock!
Beforemakinganyconnections,ensurethatyour
equipmentisdisconnectedfromthemains.
HD recorder
Aerial wall
socket
1
2
Mains wall
socket
TV
HDMI
Connecttheaerialcable(notsupplied)from
theaerialwallsockettotheAntenna IN
connectorontherearpanelofyourHD
recorder.
UsethesuppliedHDMIcabletoconnectthe
HDMIconnectorontherearpanelofyour
HDrecordertotheHDMIinputconnector
ofyourTV.Forthenextstep,notethe
chosenHDMIinputofyourTV(e.g.‘HDMI
1’).
ConnectyourTVtothemainsandselectthe
correctA/VsourceonyourTV.Thisshould
correspondtotheHDMIinputconnector
towhichyourHDrecorderisconnected.If
necessary,refertoyourTV’susermanualfor
instructions.
Notes
•Optionally,youcanalsousethesupplied
RFcabletoconnecttheRFoutput
connector (labelledTo TV/VCR) of your
HDrecordertotheRFinputconnectorof
yourTV.
•ToconnectyourHDrecordertoyour
standard-denitionTV,seepage34.
3.3 Installing your HD recorder
Beforeyoustartinstallation,makesureyouhave
madealltherequiredconnections.
Insertthetwo-wayconnectoronthe
suppliedmainsleadintothe12Vpower
supplyunit.Connectthe12Vpowersupply
unittothe12Vpowerconnectoronthe
rearpanelofyourHDrecorder.
Connectthemainsplugtothemainswall
socket.
YourHDrecorderdisplaysawelcome
messageafterafewseconds.
Press the greenbuttontostartthe
installation.
TheAntenna poweringmenuappears.
Let the Antenna poweringsettingbeOff
unlessyouuseanindoorantennathatcan
bepoweredbythecoaxialcableconnected
to the Antenna INsocketofyourHD
recorder(seenote).
Note
YourHDrecordercanonlydeliver50mA
currentunder5V,sorefertoyourindoor
antenna’susermanualtocheckifitspower
requirementtsthecapabilityofyourHD
recorder.