Filter
Top Products
20
PHILIPS LTC3963/51 (E) QR31809
ALARM MEMORY RECALL AND RESET
The VCR signals that an alarm has occurred by
flashing the ALARM indicator. If a power loss has
occurred, “PL” will appear in the first line of the
FULL type TIME/DATE display.
To recall the ALARM display:
1. Press the PROGRAM button until the ALARM
MEMORY display appears on the monitor.
2. Log the time/date information from the ALARM
memory.
To reset the ALARM memory:
• When the ALARM RESET button is pressed once,
if “PL” is flashing, “PL” will disappear. Press the
button again to clear the ALARM memory.
• When “PL” is not flashing, press the ALARM
RESET button once to clear the ALARM memory.
ALARM MEMORY Display Format Description
LAR
MMM
1
A00A
2
3
4
5
6
7
8
9
ORYE
❲❳
Displays the number of alarm
inputs that have occurred.
Counts up to 99 inputs.
ALARM COUNT :
ALARM MEMORY:
1: Displays the date/time of the first alarm recording.
2~9: Displays the 8 dates/times of the last alarms to have
occurred including the last alarm recording.