Filter
Top Products
28
PHILIPS LTC3963/51 (E) QR31809
20– 2–19991
41 : 0:273
M
ON 00A
(1, 2, 3, 4 or 5)
r
CYL LOCK, MECH LOCK or
q
REEL LOCK
i
t
✽ 90
PROBLEM GUIDE
If you are having this kind of trouble:
■
No power (No indicators ON)
■
Recorder fails to respond to user command/
operation
■
No monitor picture
■
Poor picture during monitor viewing (in the
RECORD or STOP mode)
■
Black streaks on picture during 09 or 27 mode
playback
■
Recording or playback cannot be done
■
RECORD functions not operate
■
PLAY function not operate
■
Extreme noise appears on the playback picture
■
TIME/DATE information not displayed on the
MONITOR
■
TIMER recording was not done
■
REWIND or FAST FORWARD does not operate
■
Unable to SELECT/CHANGE program feature
■
The VCR does not operate if an operation button
is pressed
■
Buzzer sounds
■
An error appears in the display
Check these things:
■■
Check to see if unit is plugged in.
(Power at supply outlet?)
■■
Perform MASTER SYSTEM RESET.
See page 22.
■■
Carefully check monitor/VCR/camera connectors.
■■
Check monitor/camera adjustments.
■■
Adjust the TRACKING control (may need to be
returned to center position if previously
adjusted).
The TRACKING control is only active for the 09
or 27 mode.
■■
Replace cassette.
■■
Clean video heads.
■■
Remove cassette and reinsert.
■■
Check the LOCK indicator on the front panel.
If the indicator is lit, press both SET and DOWN
buttons simultaneously to release the security
lock.
■■
Check the TAB indicator is lit.
■■
See Note on page 12.
■■
Be sure there is a cassette in the unit.
■■
Video heads require cleaning.
■■
Select FULL or HALF with OSD TYPE in
[OPTIONS]. See page 15.
■■
TIMER may not have been set properly.
■■
Check for SAFETY TAB of cassette.
■■
TIME and DATE are not correct.
■■
Cassette tape length may have been exceeded.
Multiple ALARMs used up tape.
■■
Tape may already be rewound or be at the end
of tape.
■■
Check the LOCK indicator on the front panel. If
the indicator is lit, press both SET and DOWN
buttons simultaneously to release the security
lock.
■■
Press the EJECT button to remove the cassette,
then restart VCR operations.
■■
You have specified the buzzer to sound when
abnormality has occurred. See page 18.
■■
Unplug the power cord and plug it in again.
■■
Press the reset button marked “S”.
Note: If the VCR does not recover by these
operations, consult your dealer.