Philips HDTV Flat Panel Television User Manual


 
10.4 Sleep Timer Settings
Setting Sleep Timer Using OSD
To set the sleep timer using the OSD screen:
1. Press the MENU +/- buttons on the remote
control or the front control panel.
2. Use the ADJ +/- buttons to navigate to
OTHER OSD sub-menu as displayed below.
3. Use the MENU +/- buttons to navigate to
SLEEP function.
4. Use the ADJ +/- buttons to set to ON.
5. The display will function normally until the
1-minute mark. At the 1-minute mark, the
sleep timer will display a second by second
coundown clock to notify you that the
display is about to switch off.
Sleep Timer On/Off
Switches the sleep timer ON or OFF.
Timer Setting
You can set the timer from 1 to 120 minutes.
Use the ADJ +/- buttons to set any number
between 1 and 120.
Setting Sleep Timer Using Remote Control
To set the sleep timer using the remote control:
1. Press the SLEEP TIMER button on the
remote control.The sleep timer will be
displayed at the upper right corner of the
screen.
2. Pressing the SLEEP TIMER button again will
cycle the sleep timer through all the preset
times.
3. When setting is complete, simply press the
DISPLAY button to hide the sleep timer
display.The sleep timer is running in the
background.
4. The display will function normally until the
1-minute mark. At the 1-minute mark, the
sleep timer will display a second by second
countdown clock to notify you that the
display is about to switch off.
5. If you wish to switch the sleep timer OFF
before the display switches off, simply press
the SLEEP TIMER button again and cycle
through all the preset times until SLEEP:
OFF is displayed.
SLEEP TIMER
0:59
Power Off Warning
SLEEP: OFF
Sleep Timer Set
SLEEP TIMER
0:59
Power Off Warning
34
User Manual BDH5011