Filter
Top Products
10.5 Variable and Fixed Audio
Output
Setting Output Using OSD
You can set the type of output sent from the
audio output jack, located on the rear side of the
display. By using an OSD based switch, you can
easily choose between variable or fixed audio
outputs.
To set the audio output setting:
1. Press the MENU +/- buttons on the remote
control or the front control panel.
2. Use the ADJ +/- buttons to navigate to
SOUND OSD sub-menu.
3. Use the MENU +/- buttons to select the
AUDIO OUTPUT option.
4. Use the ADJ +/- buttons to change setting
between FIXED or VARIABLE.
AUDIO OUTPUT
Sets the type of audio output sent from the
audio output jacks located on the rear side of
display.
• VARIABLE
When set to Variable, audio output is
affected by the display’s internal audio
controls including bass, treble, surround, BBE,
bass extension, and volume.
• FIXED
When set to Fixed, the audio output
bypasses the display’s internal audio control
so that functions such as bass, treble,
surround, BBE, bass extension, and volume
controls have no effect.
10.6 Sound Adjustments
Sound Adjustments Using OSD
Sound adjustments are available to enhance the
sound performance of the display.These
adjustments will affect the display’s built-in
speakers and the AUDIO OUTPUT jacks when
set to ‘Variable’ (see above section).To access
sound adjustments:
1. Press the MENU +/- buttons on the remote
control or the front control panel.
2. Use the ADJ +/- buttons to navigate to
SOUND OSD sub-menu.
3. Use the MENU +/- buttons to select the
various options described in this section.
35
User Manual BDH5011