Philips HDTV Flat Panel Television User Manual


 
6
User Manual BDH5011
3. CLEANING AND MAINTENANCE
Cautions When Using the Plasma Display
Do not bring your hands, face or objects
close to the ventilation holes of the plasma
display.Top of plasma display is usually very
hot due to the high temperature of exhaust
air being released through the ventilation
holes. Burns or personal injuries may occur if
any body parts are brought too close. Placing
any object near the top of the display could
also result in heat related damages to the
object as well as to the display itself.
Be sure to disconnect all cables before
moving the plasma display. Moving the display
with its cables attached may damage the
cables, and thus, cause fire or electric shock
danger.
Disconnect the power plug from the wall
outlet as a safety precaution before carrying
out any type of cleaning or maintenance
procedure.
Front Panel Cleaning Instructions
The front of the display has been specially
treated.Wipe the surface gently using only a
cleaning cloth or a soft, lint-free cloth.
If the surface is particularly dirty, soak a soft,
lint-free cloth in a mild detergent solution.
Wring the cloth to remove excessive liquid.
Wipe the surface of the display to remove
dirt.Then use a dry cloth of the same type
to dry the surface.
Do not scratch or hit the surface of the
panel with fingers or hard objects of any
kind.
Do not use volatile substances such as insect
sprays, solvents and thinners.
Cabinet Cleaning Instructions
If the cabinet becomes dirty, wipe the
cabinet with a soft, dry cloth.
If the cabinet is extremely dirty, soak a lint-
free cloth in a mild detergent solution.Wring
the cloth to remove as much moisture as
possible.Wipe the cabinet.Then use a dry
cloth of the same type to dry the surface.
Do not allow any water or detergent to
come into contact with the surface of the
display.
If water or moisture gets inside the unit,
operating problems and electrical hazards
may occur.
Do not scratch or hit the cabinet with hard
objects of any kind.