Filter
Top Products
Automatic TV channel allocation
(Follow TV)
With this function, the video recorder stores the channels in
the same order as on the TV set. This only works if the video
recorder (socket AV1 EXT1 ) and the TV set are connected
with a scart cable.
DYou must switch off any equipment connected to
socket AV2 EXT2 .
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press MENU on the remote control. The main menu will
appear on the screen.
MAIN MENU
CLOCK
AUTO TUNING
MANUAL SEARCH
FOLLOW TV
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
LANGUAGE
SPECIAL SETTINGS
________________________________
… EXITpMENU OK
†
c Select the line ’FOLLOW TV’ with rP = or ;P q
and confirm with OK . Take notice of the message on the
TV screen.
d Press OK .’TV01’ will appear in the video recorder
display.
TV01
e Select programme number ’1’ on the TV set.
f Confirm with OK on the video recorder-remote control.
The video recorder compares the TV channels on the TV
set and the video recorder.
When the video recorder finds the same TV channel as
the TV set, then it stores it at ’P01’.
DWhen ’NOTV’ (no signal from TV set) appears in the
display, the TV channels can not be allocated
automatically. In this case, read paragraph: ’Manual
TV channel allocation’.
g Wait until e.g.: ’TV02’ appears.
h Select the next programme number, e.g.: ’2’ on the TV set.
i Confirm with OK on the video recorder-remote control.
DIf you have allocated the wrong TV channel, you can
go back one step with CLEAR (CL) .
j Repeat steps gto juntil all TV channels have been
allocated.
k To end, press MENU .
Automatic TV channel search
The video recorder will search for all available TV channels.
DIf you want to start the automatic TV channel search
again, then follow the instructions below.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press MENU on the remote control. The main menu will
appear on the screen.
c Select the line ’AUTO TUNING’ with rP = or
;P q .
d Confirm with OK .
e Select the country of your residence with ;P q or
rP = .
If your country doesn’t show up, select ’OTHERS’.
f Press OK . The ’Automatic TV channel search’ starts.
AUTO TUNING
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
g When the TV channel search is complete, ’STORED’ will
appear on the screen.
h To end, press MENU .
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
8