Filter
Top Products
Continuous playback
You can automatically play a cassette again and again. When
the video recorder reaches the end of the tape or the end of
the recording, it will rewind and start again.
a Press MENU on the remote control. The main menu will
appear.
b Select the line ’SPECIAL SETTINGS’ with ;P q or
rP = . Confirm with OK .
SPECIAL SETTINGS
OSD è ON p
CLOCK DISPLAY OFF
COUNTER T.LEFT
SAT RECORDING OFF
REPEAT PLAY OFF
DIRECT RECORD OFF
________________________________
EXITpMENU STOREpOK
c Select the line ’REPEAT PLAY’ with ;P q or
rP = .
d Select ’ON’ with Q or P .
DIf you select ’OFF’, continuous playback will be
switched off.
e Confirm with OK .
This will appear on the screen: ’STORED’
f Press MENU .
g Put a cassette in the machine.
h Press PLAY G to start continuous playback.
Automatic switch-off
If you haven’t used the video recorder for a few minutes in
certain modes (e.g.: STOP), it will switch to standby
automatically. You can cancel this function to use the video
recorder as a television receiver.
a Switch on the TV set and select the programme number
for the video recorder.
b Press MENU . The main menu will appear.
c Select the line ’AUTO STANDBY’ with rP = or
;P q .
d Select ’OFF’ with Q or P .
DIf you select ’ON’, the function will be switched on.
e Confirm with OK .
This message will briefly appear: ’STORED’
f To end, press MENU .
DA TIMER recording only works when the video
recorder is switched to standby.
25