Filter
Top Products
g Confirm with OK .
h To end, press MENU .
Your decoder has now been allocated to this TV channel.
DWhen the function is switched on, ’DEC’ will appear
in the video recorder display for the TV channel you
have selected.
BBC1
Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press MENU on the remote control. The main menu will
appear.
c Select the line ’MANUAL SEARCH’ with rP = or
;P q and confirm with OK .
MANUAL SEARCH
PROGRAMME NUMBER è P01 p
S-CHANNEL NO
CHANNEL NUMBER 21
DECODER OFF
TV SYSTEM AUTO
NICAM ON
________________________________
EXITpMENU STOREpOK
d Select the line ’PROGRAMME NUMBER’ with rP = or
;P q .
e Select the desired programme number (e.g.: ’P01’) with
Q or P .
f In the line ’S-CHANNEL’, use P to select:
’NO’: To enter the channel
’YES’: To enter a special channel
g Enter the channel of the desired TV channel in line
’CHANNEL NUMBER’ with the number buttons 0-9 .
DIf you don’t know the channel number of the desired
TV channel, hold P in line ’CHANNEL NUMBER’
to start the automatic search.
Repeat automatic search you until have found the
desired TV channel. A changing channel number
will appear on the TV screen.
h If you want to allocate a decoder, in line ’DECODER’
select ’ON’ with P .
i This video recorder can receive Hi-Fi sound
transmissions in ’NICAM’. However, if sound distortion
occurs with poor reception, you can switch ’NICAM’ off.
To do this, select ’OFF’ in line ’NICAM’ with P or
Q .
j To change the TV system, in line ’TV SYSTEM’, select
the TV system with Q or P .
k Press OK to store the TV channel. ’STORED’ will briefly
appear on the TV screen.
DIf you want to search for further TV channels, start
again at step c.
l To end, press MENU .
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket AV2 EXT2 .
To do this, select programme number ’E1’ with 0 on the
remote control and then select programme number ’E2’ with
rP = . You should select the satellite channels on the
satellite receiver itself.
Special installation functions
You can select one of the following installation functions in
order to adapt the video recorder to your own specific
requirements.
7