Philips VR605A/58 VCR User Manual


 
h Then, read the paragraph ’Initial installation’ in the
chapter ’INSTALLING YOUR VIDEO RECORDER’.
Connecting without a scart cable
a Switch off the TV set.
b Remove the aerial cable plug from your TV set and insert
it into the 2 socket at the back of the video recorder.
c Plug one end of the aerial cable provided into the 3
socket on the video recorder and the other end into the
aerial input socket on your TV set.
d Insert one end of the mains cable into the mains socket
4 at the back of the video recorder and plug the other
end into the wall socket.
e Switch on your TV set and select the programme number
that you have chosen for video playback (see instruction
manual TV set).
f Tune in the TV set until this picture appears.
DThe video recorder will now transmit on channel 36/
Frequenz 591MHz.
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
CONTINUEpOK
DIf the picture quality of TV channels on your TV is
poor, please read the section ’Reducing picture
disturbance - optimizing the modulator’ in the
chapter ’ADDITIONAL FUNCTIONS’.
g When the TV has been tuned read the paragraph ’Initial
installation’ in the chapter ’INSTALLING YOUR VIDEO
RECORDER’.
Connecting other equipment
You can connect additional equipment to the AV2 EXT2 socket.
For example: a decoder, a satellite receiver or a camera
recorder.
You can connect a hifi-stereo set to the socket
AUDIO OUTL R (audio output left/right).
5