Filter
Top Products
DThe programming information has been stored in a
TIMER block.
g Make sure that the cassette you have put in can be
recorded on.
h Switch off with STANDBY/ONm .
The programmed recording will only function when the
video recorder is switched off with STANDBY/ONm .
DIf any of the TIMER blocks are in use, ’k’ will light up
on the video recorder display.
DWhile a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press
STANDBY/ONm .
DIf the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, ’SWITCH TO STANDBY- TIMER
RECORDING’ will flash on the TV screen.
DIf you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
DIf you forget to load a cassette, ’NO CASSETTE’
will appear on the TV screen and ’k’ will flash on the
video recorder display.
DIf you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
DIf ’ALL TIMERS OCCUPIED’ appears on the TV
screen when you press TIMERk , you have used up
all the available TIMER blocks. If you want to clear
or check a TIMER block, select it with ;P q or
rP = .
DProgramme numbers ’E1’ and ’E2’ are for
recordings from other sources (through scart socket
AV1 EXT1 or AV2EXT2 ).
Programming a recording
(without ’SHOWVIEW’)
a Switch on the TV set and select the programme number
for the video recorder.
b Press TIMER k on the remote control twice . The free
TIMER block will be highlighted.
c Press TIMER k . The information will appear on the
screen.
TIMER
VPS
DATE REP. PROG. START PDC END
21 MO-FR 01 20:00 ] 21:30
________________________________
STOREpOK
d With TIMER k , P or Q you can select ’DATE’ (date),
’PROG.’ (programme number), ’START’ (start time) and
’END’ (end time).
Enter or change your information with ;P q or
rP = , or with the number buttons 0-9 .
DUnder ’DATE’, use the SELECT button to select daily
or weekly programming.
’ONCE’: Recording once
’MO-FR’: Recording from Monday to Friday.
’WEEK.’: Recording every week on the same day.
DUnder ’START’, use SELECT to switch ’VPS/PDC’ on
or off. If ’]’ appears in the display, ’VPS/PDC’ has
been switched off.
e Confirm with OK when the information is correct.
DThe programming information has been stored in a
TIMER block.
f Make sure that the cassette you have put in can be
recorded on.
g Switch off with STANDBY/ONm
The programmed recording will only function when the
video recorder is switched off with STANDBY/ONm .
DIf any of the TIMER blocks are in use, ’k’ will light up
on the video recorder display.
21