Filter
Top Products
Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your video recorder needs
to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* VPS/PDC on or off
* the recording speed (SP/LP)
The video recorder stores all the information in a TIMER block.
You can programme up to 6 TIMER blocks a month in advance.
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
With ’VPS and PDC’, the TV station controls the start time and
the length of the recording. This means that the video recorder
switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
You must enter the start time exactly to the minute.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording
(with ’VIDEO Plus+’)
All the information required for a programming is contained in
the PlusCode-programming number.
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMERk button on the remote control.
The programming mode selected last is marked.
c Select the line ’VIDEOPLUS PROGRAMMING’ with the
P = or ;P button and confirm with the P button.
d Enter the entire PlusCode-programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode-programming number.
If you make a mistake, you can clear your instructions
with the CLEAR (CL) button.
TIMER
VIDEOPLUS PROGRAMMING
53124----
________________________________
MO-FR/WEEKLY TO STORE
PRESS SELECT PRESS OK
e Use the SELECT button to select daily or weekly
programming.
’MO-FR’: recordings every day from Monday to Friday.
’WEEKLY’: recordings every week on the same day of the
week.
f Confirm with the OK button. Your programming details
will then appear on the TV screen.
TIMER
VIDEOPLUS PROGRAMMING
VPS
DATE PROG. START PDC END LP
01 BBC1 20:00 21:30
________________________________
TO STORELP/SP
PRESS SELECT PRESS OK
DYou need to confirm the programme number the first
time you programme your video recorder with VIDEO
Plus+.
DIf VIDEO Plus+ does not recognise the TV channel,
’PLEASE ENTER PROGRAMME NUMBER’ will
appear on the TV screen. Instead of ’PLEASE
ENTER PROGRAMME NUMBER’, you can select
the programme number you want with the number
buttons 0-9 and confirm with the OK button.
DIf ’VIDEO PLUS CODE WRONG’ appears on the
TV screen, this means you entered an incorrect
PlusCode number or the incorrect date. Correct your
instructions or end with the TIMERk button.
DIf ’WEEKEND PROGRAMMING - NOT
POSSIBLE’ appears on the TV screen, the date
was incorrectly entered. ’Daily’ programming can
only be used for recordings to be made from
Mondays to Fridays.
7. PROGRAMMED RECORDING (TIMER)
23