Filter
Top Products
i Switch off with the STANDBY m button.
The programmed recording will only function when the
video recorder is switched off with the STANDBYm
button.
DIf any of the TIMER blocks are in use, ’k’ will light up
on the video recorder display.
DWhile a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
STANDBY m button.
DIf the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, ’SWITCH TO STANDBY - TIMER
RECORDING’ will flash on the TV screen.
DIf you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
DIf you forget to load a cassette, ’NO CASSETTE’
will appear on the TV screen and ’k’ will flash on the
video recorder display.
DIf you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
DIf `TIMER FULL´ appears on the TV screen when
you press the TIMER k button, you have used up all
the available TIMER blocks. If you want to clear or
check a programmed recording (TIMER block),
press the P button and select the TIMERR block
with the ;P or P= button.
DProgramme numbers ’E1’ and ’E2’ are for
recordings from other sources (through scart socket
EXT.1 AV 1 or EXT.2AV 2 ).
How to check or change a programmed
recording (TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMERk button on the remote control.
The programming mode selected last is marked.
c Select the line ’TIMER LIST’ with the P= or ;P
button and confirm with the P button.
d Select the programmed recording (TIMER) you want to
check or change with the ;P or P= button.
e Press the P button.
f Select the entry field with the Q or P button.
g Change any information with the P= or ;P button or
with the 0-9 buttons.
DUnder ’END’, use the SELECT button to select the
recording speed ’SP’ or ’LP’.
h Confirm with the OK button.
i To end, press the TIMERk button.
j Make sure that the cassette you have put in can be
recorded on. Switch off with the STANDBYm button.
DThe programmed recording will only function when
the video recorder is switched off with the
STANDBY m button.
25