Filter
Top Products
07
58
En
Multi-channel sound is not
output.
Is Output Terminal properly
set?
Linear PCM (2-channel) audio signals are output from output terminals
other than the one set at Output Terminal under Audio Out. Set
Output Terminal properly (page 43).
Is the audio output of the
connected AV receiver or
amplifier, etc., properly set?
Read the operating instructions of the connected AV receiver or
amplifier and check the audio output settings of AV receiver or
amplifier.
Is multi-channel sound
selected?
Use the menu screen or AUDIO to switch the disc’s sound to multi-
channel.
Noise can be heard when
outputting DTS Digital
Surround signals from the
DIGITAL OUT terminal.
Is the connected AV receiver
or amplifier compatible with
DTS Digital Surround?
If an AV receiver or amplifier that is not compatible with DTS Digital
Surround is connected to the DIGITAL OUT terminal, set DTS Out to
DTS PCM (page 37).
192 kHz or 96 kHz digital
audio signals cannot be
output from the DIGITAL
OUT terminal.
It is not possible to output 192 kHz or 96 kHz digital audio signals from
this player’s DIGITAL OUT terminal. The signals are automatically
converted to 48 kHz or less for output.
Secondary audio or
interactive audio is not
output.
Is HDMI Audio Out properly
set?
When listening to the sound from an HDMI OUT terminal, set HDMI
Audio Out to PCM (page 38).
Are Dolby Digital Out and
DTS Out properly set?
When listening to the sound from an DIGITAL OUT terminal, set Dolby
Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 37).
Sound is fast or slow. When an HDMI cable is
connected, are audio signals
being output from devices
connected with cables other
than HDMI cables?
When a Pioneer AV receiver or amplifier compatible with the PQLS
function is connected directly to the player’s HDMI OUT terminal using
an HDMI cable, the PQLS function is activated when playing an audio
CD (CD-DA). Because of this, the sound output from components other
than the ones connected by HDMI cable may be fast or slow. If this
happens, set PQLS to Off (page 38).
After a disc is inserted,
Loading stays displayed and
playback does not start.
Are there too many files
recorded on the disc?
When a disc on which files are recorded is inserted, depending on the
number of files recorded on the disc, loading may take several dozen
minutes.
is displayed in file names,
etc.
The characters that cannot be displayed on this player are displayed in
.
A message indicating low
memory appears while
playing a BD-ROM disc.
• Perform Individual/Shared Data Erase or Storage Format
(page 42).
• Perform Application Data Erase (page 42).
The DVD layer of BD and DVD
hybrid discs cannot be
played.
Is Hybrid Disc Playback
properly set?
Set Hybrid Disc Playback to DVD (page 39).
The CD layer of BD and CD
hybrid discs cannot be
played.
Is Hybrid Disc Playback
properly set?
Set Hybrid Disc Playback to CD (page 39).
The BDMV format on BD-R/
-RE discs cannot be played.
To play the BDMV format on BD-R/-RE discs containing both BDMV
and BDAV formats, set BDMV/BDAV Playback Priority to BDMV
(page 39).
Problem Check Remedy
320_VXJ5_IBD_EN.book 58 ページ ２００９年２月２５日 水曜日 午前１０時５７分