Filter
Top Products
04
26
En
Chapter 4
Playback
Playing discs or files
This section describes the player’s main operations.
For the types of discs that can be played, see Playable discs on
page 7. For the types of files that can be played, see Playable files on
page 9. Movie and music files recorded on discs are played with
Home Media Gallery (page 34).
1 Press STANDBY/ON to turn on the power.
Turn the TV’s power on and switch its input beforehand.
2 Press OPEN/CLOSE to open the disc tray and load the
disc.
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player’s front panel display.
3 Press PLAY to play the disc.
To pause, press PAUSE during playback.
To stop, press STOP during playback.
Note
• Some discs start playing automatically when the disc tray is
closed.
• DVD-Video discs have parental lock features. Input the
password registered in the player’s settings to unlock the
parental lock. For details, see page 47.
• For some BD-R/-RE, playback protection is set for the disc or
titles. Input the code number set for the disc to unlock the
protection.
If the disc menu is displayed
For some discs, the disc menu is displayed automatically when
playback starts. The contents of the disc menu and the way to
operate differ from disc to disc.
Resuming playback from where it was
stopped (resume playback function)
•When STOP is pressed during playback, the point at which
the disc stopped is stored in the memory. When PLAY is
pressed, playback resumes from that point.
• For CDs and music files, playback starts from the beginning of
the track/file that was playing.
• To cancel the resume playback function, press STOP while
playback is stopped.
Note
• The resume playback function is canceled automatically in the
following cases:
– When the disc tray is opened.
– When the file list window is switched.
– When the power is turned off. (For BDs and DVDs this does
not cancel the resume playback function.)
• The resume playback function cannot be used for some discs.
Forward and reverse scanning
1 During playback, press or .
• The scanning speed switches each time the button is pressed.
The speed steps depend on the disc or file (the speed is
displayed on the TV screen).
• Forward or reverse scanning is also possible by holding the
button down. Normal playback resumes when the button is
released.
Note
• No sound is output when scanning BDs, DVDs and movie files.
• Sound is output when scanning CDs and music files.
• For some discs, normal playback resumes automatically when
the chapter switches.
To resume normal playback
Press PLAY.
STANDBY/ON
OPEN/CLOSE
TV CONTROL
INPUT
SELECT
CH
VOL
TV CONTROL
STANDBY/ON
OPEN/CLOSE
INPUT
SELECT
CH
VOL
PLAY
PREV
PAUSE
STOP
NEXT
RED
GREEN
YELLOW BLUE
BD Movie files
DVD Music files
AVCHD
CD
PLAY
PREV
PAUS E
STOP
NEXT
LX08_WV_EN.book 26 ページ ２００８年７月１５日 火曜日 午後２時５１分