Filter
Top Products
54
<VRB1210>
Changing Settings
ON
AUDIO and SUBTITLE can be set in advance.
In the case of foreign movies, the original audio language and
English subtitles will be automatically selected.
In the case of English language movies, the original audio language
(English) will be selected, and subtitles will not be displayed.
On some discs, this function may not operate as described in the
example.
If AUDIO and SUBTITLE differ or DISPLAY and ASS.SUBTIT of
the SUBTITLE sets OFF, the setting will be the same as OFF.,
changing settings during playback using “Selecting Languages”
(page 43) and “Selecting Subtitle Language” (page 44) is possible.
OFF
Regular subtitle and audio settings will be as selected.
The subtitle which is displayed by discs can be selected,
when the subtitle is set to “OFF”.
SEL SUBTL: The selected subtitle language will be selected.
WITH AUDIO: The selected audio language will be selected.
When viewing software recorded in the wide mode, the
image’s height to width ratio can be switched to match the
TV being used.
This player lets you change the audio output via an optical
digital output jack and coaxial digital output jack. Selection
of a DVD's Dolby Digital audio (3 dimensional audio used in
theaters etc.) or Linear PCM (same digital audio as that on
CD) can be made.
When a decoder or amplifier that has an MPEG input jack
is used, the audio output from this unit's optical digital
output jack and digital output's (coaxial) can be changed.
Selection of a DVD's MPEG or linear PCM signal can be
made.
When using an amplifier that has a DTS input jack, the DTS
signal can be set to be output (ON) or not output (OFF) for
DVDs that have been recorded with DTS signals.
Returning changed settings to the initial settings (initialization)...
First make sure the power is turned off. With the power off, while pressing the
7
button, press the
STANDBY/ON
button.
Item Settings
Details
Settings
Initial settings
(factory settings at
the time of shipment)
ON
OFF
LANG SET
Class
OUTPUT INITIAL
Item
DOLBY DIGITAL
The Dolby digital
signal is output as is.
(When an amplifier
with built-in Dolby
digital (AC-3)
decoder is used.)
MPEG = PCM
Output is in the
linear PCM standard
whether the signal is
an MPEG signal or a
linear PCM
compatible signal.
OFF
DOLBY DIGITAL
= PCM
Provides Linear
PCM sound with
both Dolby Digital
and Linear PCM
sources (when a
regular amp or
Dolby Pro logic
amp is used).
MPEG
The MPEG signal is
output as is.
ON
SUBT.OFF
SEL SUBTL
WITH AUDIO
WIDE
LETTER BOX
PAN&SCAN
ASPECT
DOLBY
DIGITAL
DIG. OUTPUT
MPEG
DTS
AUTO LANG.