Pioneer DVR-330-S DVD Recorder User Manual


 
Connecting up
02
12
En
Chapter 2
Connecting up
Rear panel connections
1 AC IN
Connect to a power outlet using the supplied power cable
after making all other connections.
2 Audio/video inputs 1 and 3
Two sets of audio/video inputs (stereo analog audio;
composite and S-video video) that you can use to connect
to satellite receivers, TVs, VCR or other source
component for recording.
3 Audio/video outputs 1 and 2
Two sets of audio/video outputs (stereo analog audio;
composite and S-video video) that you can use to connect
TVs or monitors.
4 COMPONENT VIDEO OUT
A high-quality video output for connecting to a TV or
monitor with a component video input.
5 ANTENNA IN (RF IN)/OUT
Connect your TV antenna to the
ANTENNA
IN (RF IN)
jack. The signal is passed through to the
ANTENNA
OUT
jack for connection to your TV.
6 OPTICAL DIGITAL OUT
A digital audio output for connecting to an AV amp/
receiver, Dolby Digital/DTS decoder or other equipment
with optical digital input.
7 CONTROL IN
Use to control this recorder from the remote sensor of
another Pioneer component with a
CONTROL OUT
terminal and bearing the Pioneer
mark. Connect the
CONTROL OUT
of the other component to the
CONTROL IN
of this recorder using a mini-plug cord.
Front panel connections
On the right side of the front panel a flip-down cover
hides more connections.
8 DV IN
A DV input i.LINK connector, suitable for connecting a
DV camcorder.
9 Audio/video input 2
Audio/video input (stereo analog audio; composite and
S-video video), especially suitable for camcorders, game
consoles, portable audio, etc.
ANTENNA
DIGITAL OUT
CONTROL
IN
OPTICAL
INPUT 1/AUTO START REC
S-VIDEO
VIDEOAUDIO
LR
INPUT 3
OUTPUT 1
OUTPUT 2
S-VIDEO
VIDEOAUDIO
LR
COMPONENT
VIDEO OUT
YP
B
P
R
IN OUT
AC IN
7 6
1 32 4 5
VIDEO
L(MONO)
AUDIO
INPUT 2
R
S-VIDEO
DV IN
8 9
DVR-330_RL.book 12 ページ 2005年3月1日 火曜日 午後10時47分