Filter
Top Products
Recording
05
41
En
Important
• You must use a DVD-RW Ver. 1.1 / 2x or
Ver. 1.2 disc to be able to use this feature.
• You may not be able to use this feature with a
DVD-RW disc that was first initialized on another
recorder.
• Chase playback is not possible using a VR mode
DVD-R disc.
• You can’t use this feature during Auto Start
Recording, or in Auto Start Recording standby (the
AUTO
indicator is lit in the front panel display).
• During recording, press
PLAY to start playback
from the beginning of the current recording
1
, or
press DISC NAVIGATOR and select another title to
play from there.
You can use all the usual playback controls, such as
pause, slow-motion play, scan
2
and skip.
• To stop playback, press
STOP
(recording will
continue).
• To stop recording, press
STOP REC
(playback will
continue).
• During recording or in timer recording standby, you
can’t play a DVD or Video CD/Super VCD disc if the
Input Line System setting doesn’t match the TV line
system of the disc (see also
Additional information
about the TV system settings
on page 74). Also,
during simultaneous recording and playback, if the
TV line system of the playback track/title changes
then playback will automatically stop.
Recording from an external
component
You can record from an external component, such as a
camcorder or VCR, connected to one of the recorder’s
external inputs.
1 Make sure that the component you want to
record from is connected properly to the DVD
recorder.
See Chapter 2 (
Connecting up
) for connection options.
2 Press INPUT SELECT repeatedly to select one of
the external inputs to record from.
There are three analog inputs and a DV digital input. The
current input is shown on-screen and in the front panel
display:
•
L1
– Input 1/Auto Start Rec
•
L2
– Input 2 (front panel)
•
L3
– Input 3
•
DV
– DV input (front panel)
Check that the
Audio In
settings for
External Audio
,
Bilingual Recording
and
DV Input
are as you want them
(see
Audio In Settings
on page 69).
• If the aspect ratio is distorted (squashed or
stretched), adjust on the source component or your
TV before recording.
Note
1.You can’t start playback immediately after recording starts.
2.When scanning a DVD, no sound is output if the recorder is also recording (see
Scanning discs
on page 48).
VR mode Video mode
INPUT
SELECT
AUDIO
CLEAR
REC
REC MODE
ì
DVR-330_RL.book 41 ページ ２００５年３月１日 火曜日 午後１０時４７分