Pioneer DVR-330-S DVD Recorder User Manual


 
Recording
05
33
En
Recorded audio
In all except the
LPCM
mode, sound is recorded in two
channel Dolby Digital format. When set to
LPCM
, sound
is recorded in high quality, uncompressed Linear PCM
format.
If the broadcast audio is bilingual and you are recording
in Video mode or on the
LPCM
setting, use the Bilingual
Recording setting (page 70) to select the
A/L
or
B/R
audio channel to record before recording starts. In other
cases, both channels of a bilingual broadcast will be
recorded and you can switch on playback.
Restrictions on video recording
You cannot record copy-protected video using this
recorder. Copy-protected video includes DVD-Video discs
and some satellite broadcasts. If copy-protected material
is encountered during a recording, recording will pause
automatically and an error message will be displayed on-
screen.
Video that is ‘copy-once only’ can only be recorded ona
disc in VR mode (see below).
When recording a TV broadcast or through an external
input, you can display copy control information on
screen. (see
Displaying disc information on-screen
on
page 30).
CPRM
CPRM is a copy protection/scrambling system developed
for the recording of ‘copy once’ broadcast programs.
CPRM stands for
Content Protection for Recordable
Media
.
This recorder is CPRM compatible, which means that
you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
recordings can only be made on CPRM-compatible
DVD-R (ver. 2.0/8x or higher) or DVD-RW (ver. 1.1 or
higher) discs formatted in VR mode.
DVD CPRM recordings can only be played on players that
are specifically compatible with CPRM.
Recording equipment and copyright
Recording equipment should be used only for lawful
copying and you are advised to check carefully what is
lawful copying in the country in which you are making a
copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception
or consented to by the rightowners.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Setting the picture quality/recording
time
Before starting a recording, you will usually want to set
the picture quality/recording time. There are six standard
settings available, which allow you to choose a balance
between picture quality and recording time.
When Manual Recording is set to On (see
Manual
Recording
on page 72), a further option will be available
(
MN1
32
or
LPCM
, depending on what you set).
See also
Recording time and picture quality
on page 32 for
more information.
Press REC MODE repeatedly to select a recording
setting.
XP
– High quality
SP
– Standard play
LP
– Long play
EP
– Extended play
SLP
– Super Long play
SEP
– Super Extended play
MN
/
LPCM
1
– Manual / Linear PCM (available only
when manual recording is on)
The setting is indicated in the front panel display, and
shown on-screen together with the recording time for a
blank recordable disc. If a recordable disc is loaded, the
approximate remaining recording time for that disc is
also shown. (Note that if the On Screen Display setting
(see
On-Screen Display
on page 73) is
Off
then this
information is not displayed.)
Note
1.Audio is recorded in 16-bit Linear PCM format, video is recorded at XP quality. When recording a bilingual broadcast, select which audio chan-
nel to record (see
Bilingual Recording
on page 70).
VR mode Video mode
REC MODE
DVR-330_RL.book 33 ページ 2005年3月1日 火曜日 午後10時47分