Filter
Top Products
Connecting up
02
16
En
Connecting to a cable box or satellite receiver (2)
If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.
1
Using the setup on this page you can:
• Record any channel by selecting it on the cable box/satellite receiver.
• Record using the Auto Start Recording feature (see
Automatic recording from a satellite tuner
on page 42).
Important
• Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component
directly to your TV or AV amp/receiver.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2 Connect the AUDIO and VIDEO OUTPUT jacks (1
or 2) on this recorder to a set of audio/video inputs
on your TV using a set of A/V cables (as supplied).
This enables you to watch discs.
3 Connect the audio/video output of your cable
box/satellite receiver to the INPUT jacks on this
recorder using a set of A/V cables.
This enables you to record scrambled TV channels.
Note
1. • The setup on this page does not allow you to watch one channel and record another.
• The diagram shows standard video connections, but you can alternatively use the S-video or component video connections if they’re avail-
able.
TV
ANTENNA
DIGITAL OUT
CONTROL
IN
OPTICAL
INPUT 1/AUTO START REC
S-VIDEO
VIDEOAUDIO
LR
INPUT 3
OUTPUT 1
OUTPUT 2
S-VIDEO
VIDEOAUDIO
LR
COMPONENT
VIDEO OUT
YP
B
P
R
IN OUT
AC IN
Cable box/
Satellite receiver
Antenna/cable TV
wall outlet
ANTENNA
IN
ANTENNA
OUT
ANTENNA
OUT
ANTENNA
IN
ANTENNA
IN (RF IN)
AUDIO/VIDEO
OUTPUT
AUDIO/VIDEO
INPUT
1
1
1
2
3
DVR-330_RL.book 16 ページ ２００５年３月１日 火曜日 午後１０時４７分