Filter
Top Products
The Initial Setup menu
13
95
En
Bilingual Recording A/L •
Record the left (A) channel of a bilingual source when recording to
HDD with HDD Recording Format set to Video Mode ON, to DVD in
Video mode or in
LPCM
mode, from an external source.
B/R
As above, but for right (B) channel recording.
When recording bilingual audio to DVD in VR mode (except in
LPCM
mode), or to HDD with HDD Recording Format set to Video Mode Off (except
in
LPCM
mode), both audio channels are recorded and you can switch to the one you want on playback.
DV Input Stereo 1 •
Select to use the ‘live’ audio track (recorded during the video shoot)
from a camcorder that supports two stereo audio tracks.
Stereo 2
Select to use the overdubbed audio track from a camcorder that sup-
ports two stereo audio tracks.
Mix
Select one of the three settings to use a mix of the two stereo audio
tracks.
Input Level (L1–L3) -6dB – +6dB
(default: 0 dB)
Adjust the input level separately for each of the external inputs from
–6dB to +6dB in steps of 3dB.
Audio Out Settings
Digital Out On •
Activates the digital audio output.
Off
Deactivates the digital audio output.
When set to
Off
, all the following Audio Out settings are grayed out.
Dolby Digital Out Dolby Digital •
Output a Dolby Digital signal when a Dolby Digital source is being
played.
Dolby Digital
PCM
Convert Dolby Digital sources to Linear PCM output. Use if your con-
nected equipment doesn’t have a Dolby Digital decoder.
DTS Out On •
Output a DTS signal when a DTS source is being played.
Off
Switch off the digital output when a DTS source is being played. Use
when your connected equipment doesn’t have a DTS decoder. In this
case, use the analog audio outputs.
96 kHz PCM Out 96 kHz
48 kHz •
Convert 96 kHz digital audio sources to 48 kHz output. Use if your con-
nected equipment doesn’t support 96 kHz sampling rate.
96 kHz
Output 96 kHz digital audio when a 96 kHz source is being played.
MPEG Out MPEG
Output an MPEG audio signal when a source using MPEG audio is
being played.
MPEG
PCM •
Convert sources with MPEG audio to Linear PCM output. Use if your
connected equipment doesn’t have an MPEG audio decoder.
Setting
Options Explanation
DVR-433H_UK.book 95 ページ ２００５年３月１日 火曜日 午後５時６分