Filter
Top Products
9
RS-232C Adjustment Mode
MIR MIRROR MODE: ### Displays the current MIRROR MODE setting. ¶
MIRS00 MIRROR MODE: OFF Turns the MIRROR MODE OFF (normal display). ‡
MIRS01 MIRROR MODE: X Sets the MIRROR MODE to left-right reversal. ‡
MIRS02 MIRROR MODE: Y Sets the MIRROR MODE to up-down reversal. ‡
MIRS03 MIRROR MODE: XY
Sets the MIRROR MODE to up-down, left-right reversal.
‡
MNR MPEG NR: ###### Displays the current MPEG NR setting. ¶
MNRS00 MPEG NR: OFF Turns MPEG NR OFF. ‡
MNRS01 MPEG NR: LOW Sets MPEG NR to LOW. ‡
MNRS02 MPEG NR: MIDDLE Sets MPEG NR to MIDDLE. ‡
MNRS03 MPEG NR: HIGH Sets MPEG NR to HIGH. ‡
MSC ########### Displays 2-screen display operation ON/OFF. ¶¶
MSCS00 MULTISCREEN: OFF Turns the 2-screen display operation OFF. ‡‡
MSCS01 MULTISCREEN: ON Turns the 2-screen display operation ON. ‡‡
MST ########### Displays the current 2-screen operation type. ¶¶
MSTS01 2SCREEN Sets 2-screen operation to 2 SCREEN. ‡‡
MSTS02 PinP DOWN RIGHT Sets 2-screen operation to PinP (lower right). ‡‡
MSTS03 PinP UP RIGHT Sets 2-screen operation to PinP (upper right). ‡‡
MSTS04 PinP UP LEFT Sets 2-screen operation to PinP (upper left). ‡‡
MSTS05 PinP DOWN LEFT Sets 2-screen operation to PinP (lower left). ‡‡
MSTS06 PoutP Sets 2-screen operation to PoutP. ‡‡
MTN VIDEO MUTING: OFF Turns OFF video muting. ¶¶
MTY VIDEO MUTING: ON Turns ON video muting. ¶¶
[O]
OMN ORBITER: OFF Turns ORBITER OFF. ‡
OMY ORBITER: ON Turns ORBITER ON. ‡
[P]
PLN BRIGHT ENHANCE: OFF Turns the center brightness enhancement OFF. ‡
PLY BRIGHT ENHANCE: ON Turns the center brightness enhancement ON. ‡
POF – Power OFF ‡‡
PON – Power ON ‡
PUC PURECINEMA: ###### Displays the current PURECINEMA setting. ¶
PUCS00 PURECINEMA: OFF Turns PURECINEMA OFF. ‡
PUCS01 PURECINEMA: STANDARD Sets PURECINEMA to STANDARD. ‡
PUCS02 PURECINEMA: ADVANCE Sets PURECINEMA to ADVANCED. ‡
[R]
RHI R HIGH: ∗∗∗ Adjusts R. HIGH. ‡‡
RLW R LOW: ∗∗∗ Adjusts R. LOW. ‡‡
RSL R SIDE MASK LEVEL: ∗∗∗ Adjusts the RED side mask. ‡‡
[S]
SFT SIGNAL FORMAT: #### Displays the current SIGNAL FORMAT. ¶
SFTS01 SIGNAL FORMAT: Sets the SIGNAL FORMAT to PC FORMAT 1 ‡
VGAorXGAorSXGAor720PC (VGA or XGA or SXGA or 720PC).
SFTS02 SIGNAL FORMAT: Sets the SIGNAL FORMAT to PC FORMAT 2
‡
WVGAorWXGAorSXGA+ (WVGA or WXGA or SXGA+).
SFTS03 SIGNAL FORMAT:
Sets the SIGNAL FORMAT to VIDEO 525p or VIDEO 750p.
‡
VIDEO 525p or VIDEO 750p
SFTS04 SIGNAL FORMAT: PC AUTO Sets the SIGNAL FORMAT to PC AUTO. ‡
SHP SHARPNESS: ∗∗∗ Adjusts the SHARPNESS. ‡‡
SIM SIDE MASK MODE: ###### Displays the current side mask setting. ¶
SIMS01 SIDE MASK MODE: NORMAL Sets the side mask setting to normal. ‡
SIMS02 SIDE MASK MODE: OVERLAY1 Sets the side mask setting to OVERLAY1. ‡
SIMS03 SIDE MASK MODE: OVERLAY2 Sets the side mask setting to OVERLAY2. ‡
SLN – Turns the STILL setting to OFF. ‡
SLY STILL Turns the STILL setting to ON. ‡
Command name AJY (232C integrator) Display
RS-232C
Adjustment
Validity
Normal
Validity
Numerical
Direct
Validity
Remarks