Filter
Top Products
13
RS-232C Adjustment Mode
5) <GSS> (GET STATUS SETUP: Gets menu and integrator SETUP data.)
Order
Data contents Size Output Remarks
1 GRADATION 1 Byte 1: GAMMA 2.0 2: GAMMA 1.8 #
3: GAMMA 2.2 4: DRE MID
5: DRE HIGH 6: DRE LOW
7: HIGH CNT.
2 BRT.ENHANCE 1 Byte 0: OFF 1: ON #
3 SUB VOLUME 2 Byte 00 to 20
4 COLOR TEMP. 1 Byte 1: LOW 2: MID LOW #
3: MIDDLE 4: MID HIGH
5: HIGH
5 DNR 1 Byte 0: OFF 1: LOW #
2: MIDDLE 3: HIGH
6 MPEG NR 1 Byte 0: OFF 1: LOW #
2: MIDDLE 3: HIGH
7 CTI 1 Byte 0: OFF 1: ON #
8 PURECINEMA 1 Byte 0: OFF 1: STANDARD #
2: ADVANCE
9 COLOR DECODING 1 Byte 1: RGB 2: COMPONENT1 #
3: COMPONENT2
10 COLOR SYSTEM 1 Byte 1: AUTO 2: NTSC 3: PAL #
4: SECAM 5: 4.43NTSC
6: PAL M 7: PAL N
11 SIGNAL FORMAT 3 Byte # See below
12 Dummy data 3 Byte
13 Input function data (main) 3 Byte
14 Screen size data 1 Byte
15 Check sum 2 Byte
SIGNAL FORMAT S01 ............ VGA or XGA or SXGA or 720-PC
(720-PC can be selected only when a video card is mounted.)
S02 ............ WVGA or WXGA or SXGA+
S03 ............ 525p or 750p (Either one can be selected only when a video
card is mounted.) or PC AUTO
***............. Dummy data is output for signals other than those above.
• 13 and 14 output the same contents as GST items 3 and 5.
• Dummy data is output for setting data that cannot be output depending on the type of # signal.