Filter
Top Products
10
RS-232C Adjustment Mode
SSI ######### Displays the current sub screen input function. ¶¶
SSIS01 INPUT1(SUB) Switches the sub screen to INPUT1. ‡‡
SSIS02 INPUT2(SUB) Switches the sub screen to INPUT2. ‡‡
SSIS03 INPUT3(SUB) Switches the sub screen to INPUT3. ‡‡
SSIS04 INPUT4(SUB) Switches the sub screen to INPUT4. ‡‡
SSIS05 INPUT5(SUB) Switches the sub screen to INPUT5. ‡‡
STD STANDARD W/B Returns the integrator PICTURE and WHITE ‡
BALANCE to the factory settings.
SVL SUB VOLUME: ∗∗∗ Adjusts the sub volume. ‡‡
SZM ######## Displays the current screen size setting. ¶¶
SZMS00 Dot by Dot or PARTIAL Sets the screen size to Dot by Dot or PARTIAL. ‡‡
SZMS01 4 : 3 Sets the screen size to 4:3. ‡‡
SZMS02 FULL or FULL1080i Sets the screen size to FULL or FULL1080i. ‡‡
SZMS03 ZOOM Sets the screen size to ZOOM. ‡‡
SZMS04 CINEMA Sets the screen size to CINEMA. ‡‡
SZMS05 WIDE Sets the screen size to WIDE. ‡‡
SZMS08 FULL1035i Sets the screen size to FULL1035i. ‡‡
SZMS09 UNDERSCAN Sets the screen size to UNDERSCAN. ‡
[T]
TNT TINT: ∗∗∗ Adjusts the TINT. ‡‡
[U]
UP0 # Adds 10 to the adjustment value. ‡‡
UPn # Adds n to the adjustment value (n = 1 to 9). ‡‡
UPF # Sets the adjustment value to maximum. ‡‡
USC UNDERSCAN: ∗∗∗ Displays the current UNDERSCAN setting. ‡
USCS00 UNDERSCAN: OFF Turns the UNDERSCAN setting OFF. ‡
USCS01 UNDERSCAN: ON Turns the UNDERSCAN setting ON. ‡
[V]
VOL VOLUME: ∗∗∗ Adjusts the audio volume. ‡‡‡
VPS V. POSITION: ∗∗∗ Adjusts the V POSITION. ‡‡
VRO AUDIO OUT VARIABLE Selects variable audio output. ‡
VSI V. SIZE: ∗∗∗ Adjusts V. SIZE. ‡‡
Command name AJY (232C integrator) Display
RS-232C
Adjustment
Validity
Normal
Validity
Numerical
Direct
Validity
Remarks