Pioneer PDP-504CMX-S Flat Panel Television User Manual


 
27
En
PICTURE/SCREEN Adjustment
English
Adjusting screen POSITION, CLOCK,
and PHASE
<manual adjust>
PICTURE/SCREEN Adjustment
3 Use the 5/ buttons to select [AUTO SET UP
MODE].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
CHANGE EXIT
PICTURE SCREEN SETUP OPTION
4 Press the SET button to activate the setting.
The factory default setting is [INACTIVE].
Each time the button is pressed, the setting alternates
as follows:
5 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
Optimum settings may not be possible for low-luminance and
certain other signals. In such cases, set the [AUTO SETUP
MODE] to [INACTIVE], and use the manual adjustment methods
explained in the following section, Adjusting screen
POSITION, CLOCK, and PHASE <manual adjust>.
3 INACTIVE
ACTIVE 2
1 Press the MENU button to display the menu
screen.
MENU INPUT1
ENTER
SET
EXIT
MENU
PICTURE SCREEN SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
R.LEVEL
G.LEVEL
B.LEVEL
H.ENHANCE
V.ENHANCE
PICTURE RESET
2 Use the 2/3 buttons to select [SCREEN].
:
0
POSITION
CLOCK
:
0
PHASE
:
00
/
SCREEN RESET
MENU INPUT1
PICTURE SCREEN SETUP OPTION
ENTER EXIT
MENU
2/3
5/
SET
MENU
5/
SET
2/3
Main unit operating
panel
Remote control unit