Filter
Top Products
6
STEP3:
Please connect TV (monitor) to the Video output connector in the rear panel.
Video Input connection (TV or monitor)
STEP4:
Please use standard analog video cameras to connect to the DVR400. The DVR-400 equipped 4
BNC connectors on the rear panel for video input.
Physical camera installation with DVR-400 is shown as below:
l Connect the camera signal line to video input on DVR-400
l Power on camera, and you may now check the video on the screen.
DVR-400 provides 4 x BNC connectors for video source input.
ë
Note
Please be sure to finish the hard disk drive installation
before using the DVR. The Maximum HDD capacity support is
250GB.
ë
Note
DVR-400 provides one S-Video and
two BNC connector for video
output.