Polk Audio DP-1 DVD Player User Manual


 
www.polkaudio.com
6
There are two remotes included with the DP-1 CD/DVD player. The
large, black DR-3 is a unified system programmable/learning remote
control that has been pre-programmed to operate the most-often used
functions of both the Digital Solution preamp/processor and the DP-1
CD/DVD player. You can also program it to operate other components in
your system to reduce “remote clutter” on your coffee table. (See the
separate DR-3 Owner’s Manual for instructions on how to program and
use this remote for other devices.)
As nifty as it may be, the DR-3 unified remote cannot duplicate every
function of the DP-1 CD/DVD player or Digital Solution preamp/
processor without it turning into a nightmare of tiny buttons. For
control of the rarely used functions of the CD/DVD player and Digital
Solution preamp/processor, you’ll have to use their dedicated remotes,
the smaller DR-4, DR-1, or DR-2 remotes. If you can’t find them, look
under the sofa cushions; they’re probably there.
Notes on Batteries
Do not leave dead or exhausted batteries in the remote control.
Do not use different types of batteries together, or mix old and new
batteries.
If you do not use the remote control for a long period of time, remove
the batteries to avoid possible damage from battery corrosion.
Replace the batteries with new ones if the remote control does not
function correctly or if the operating range becomes reduced.
If the batteries leak, wipe the battery liquid from the battery
compartment being careful not to get any on you, then insert
new batteries.
REMOTE CONTROLS
1
3
8
11
4
5
10
6
7
9
2
Status
Light